全国服务热线
15552522412 
联系我们
正规线上手机赌钱平台

联系人:田经理

联系电话:15552522412 

网址:

地址:济南市天桥区北园大街248号二楼西侧间

当前位置: 首页 > 新闻中心 > 常见问题 >

高压水清洗管道更加彻底和干净!

来源:2020正规赌博app  发布时间:2020-04-23 11:00:28

  目前,管道清泥的方法越来越多,管道清泥的设备也越来越多,层出不穷。常用的方法是利用管道高压清洗设备上的高强度压力水,对管道进行强冲击力的清泥,使管道内部的清洗更加彻底和干净。
  At present, there are more and more methods and equipment for pipeline mud cleaning. The common method is to use the high-strength pressure water on the pipeline high-pressure cleaning equipment to clean the pipeline with strong impact force, so as to make the internal cleaning of the pipeline more thorough and clean.
  使用高压泵高压管道清洗设备生产高强度压力的水,用高强度的压力水通过高压喷嘴孔,形成超细水射流的高速,高压水射流影响的强大影响清洗对象,清洗设备规模和附件和木屐在切割、破碎、挤压,冲洗彻底实现完全清洁的目的。
  Use high-pressure pump high-pressure pipeline cleaning equipment to produce high-strength pressure water, use high-strength pressure water to pass through the high-pressure nozzle hole, form the high speed of ultra-fine water jet, the strong influence of high-pressure water jet on cleaning objects, the scale of cleaning equipment and accessories and clogs are cutting, crushing, extruding, and washing to completely realize the purpose of complete cleaning.
  首先,用高压水清洗管道。
  First, clean the pipe with high-pressure water.
  其次,打开盖板化粪池的铁钩,然后用长竹杆挑起碎片凝固的层管道,确认管道和碎片组件的类型,根据具体情况调整高压泵产生的压力值。
  Secondly, open the iron hook of the cover septic tank, then use a long bamboo bar to lift the layer of pipe solidified by debris, confirm the type of pipe and debris components, and adjust the pressure value generated by the high-pressure pump according to the specific situation.
  最后,将高压喷嘴插入管道30cm以上,打开高压泵,同时对水进行清洗操作。
  Finally, insert the high-pressure nozzle into the pipeline for more than 30cm, turn on the high-pressure pump, and clean the water at the same time.
济南化粪池清理
  施工注意事项
  Construction precautions
  施工前应仔细检查喷嘴是否有堵塞现象,如发现堵塞应及时处理
  Before construction, the nozzle shall be checked carefully to see if it is blocked. If it is found, it shall be handled in time
  管道清洗喷嘴要精心设计制造,喷嘴最好均匀地分布在喷嘴的圆周上,且孔径与大小角完全相等,主要作用是实现反作用力的平衡。
  The pipe cleaning nozzle should be carefully designed and manufactured. The nozzle should be evenly distributed on the circumference of the nozzle, and the hole diameter and size angle are completely equal. The main function is to achieve the balance of reaction force.
  使用高压清洗机时,需将喷头放入管道内约30cm处,然后对喷头加压进入管道内。清洗完毕后,将喷头从管道中拔出时,需要将高压泵的压力调至零,以避免喷头形成水带摆动而伤害到操作人员。
  When using the high-pressure cleaning machine, put the nozzle into the pipeline about 30cm, and then pressurize the nozzle into the pipeline. After cleaning, when the nozzle is pulled out of the pipeline, the pressure of the high-pressure pump needs to be adjusted to zero to avoid the nozzle forming water belt swing and hurting the operator.